OpenWay Riva 500W ERT Module in Mobile Mode Read Endpoint Response Fields

Response Fields	Description
Endpoint Id	The ERT module’s device identification number.
Reading	The meter reading as reported by the ERT module.
Endpoint Type	The module’s endpoint model (100W+).
Cut Detected	Yes. The module has detected a cut cable. No. The module has not detected a cut cable.
Cut Cable	Yes. The module detected a cut cable sometime during the last 24 hours (Fixed Network mode) or during the last 40 days (mobile mode). No. The module did not detect a cut cable during the last 24 hours (Fixed Network mode) or during the last 40 days (mobile mode).
Reverse Flow	Yes. The module has detected a reverse flow. No. The module has not detected a reverse flow.
Leak Detected	Yes. The module has detected a leak. No. The module has not detected a leak.
Battery State	The state of the endpoint battery’s electrical charge. Good. The battery's charge is at greater than 10 percent of capacity. Bad. The battery's charge is at 10 percent or less of capacity.
Register Type	Can be either of the following: Pulser Encoder
Leak Sensor	Whether or not the endpoint has a leak sensor: Not connected
Metrology Counter	The number of times the module received a programming command that affected its metrology.
Non Metrology Counter	The number of times the module received a non-metrology programming command.